Gossen digipro f2 full#

The exposure meter determines the corresponding aperture for correct exposure using the preset flash sync time and displays it as a digital value, and as a flashing point on the analog aperture scale. With flash exposure metering, it's possible to work either with or without a synchronizing cable. The adjustable correction value with +9.9 EV cover large extension factors for neutral-density filters used for long time exposures in daylight. With the exposure value measuring function, the exposure value as well as various f-stop / shutter speed combinations are displayed. The exposure meter then determines the required exposure time. When the aperture pre-selection metering function is used, the desired f-stop is specified, for example in order to set the depth of focus. By pressing and holding the metering key and scanning the subject in this mode, the contrast range, is displayed at the f-stop scale in f-stop values. The exposure meter then determines the f-stop, which has to be set at the camera. When the shutter pre-selection metering function is used in photo mode, the desired exposure time is specified, for example in order to focus sharply on moving subjects. The swivel head makes it possible to lower the measuring sensor all the way down to the subject level for macro and tabletop photography

Gossen digipro f2 full#

The light meter demonstrates the full potential by means of the incident light metering method which, as compared with the reflected light metering method used by cameras, functions independently of subject quality. The DigiPro F2 Flash and Ambient Light Meter v2from Gossen is a high-performance allrounder for analog and digital photographers and filmmakers who use continuous illumination as well as flash.